EC2 / Client / create_route_server_endpoint

create_route_server_endpoint¶

EC2.Client.create_route_server_endpoint(**kwargs)¶

Creates a new endpoint for a route server in a specified subnet.

A route server endpoint is an Amazon Web Services-managed component inside a subnet that facilitates BGP (Border Gateway Protocol) connections between your route server and your BGP peers.

For more information see Dynamic routing in your VPC with VPC Route Server in the Amazon VPC User Guide.

Request Syntax

response = client.create_route_server_endpoint(
    RouteServerId='string',
    SubnetId='string',
    ClientToken='string',
    DryRun=True|False,
    TagSpecifications=[
        {
            'ResourceType': 'capacity-reservation'|'client-vpn-endpoint'|'customer-gateway'|'carrier-gateway'|'coip-pool'|'declarative-policies-report'|'dedicated-host'|'dhcp-options'|'egress-only-internet-gateway'|'elastic-ip'|'elastic-gpu'|'export-image-task'|'export-instance-task'|'fleet'|'fpga-image'|'host-reservation'|'image'|'import-image-task'|'import-snapshot-task'|'instance'|'instance-event-window'|'internet-gateway'|'ipam'|'ipam-pool'|'ipam-scope'|'ipv4pool-ec2'|'ipv6pool-ec2'|'key-pair'|'launch-template'|'local-gateway'|'local-gateway-route-table'|'local-gateway-virtual-interface'|'local-gateway-virtual-interface-group'|'local-gateway-route-table-vpc-association'|'local-gateway-route-table-virtual-interface-group-association'|'natgateway'|'network-acl'|'network-interface'|'network-insights-analysis'|'network-insights-path'|'network-insights-access-scope'|'network-insights-access-scope-analysis'|'placement-group'|'prefix-list'|'replace-root-volume-task'|'reserved-instances'|'route-table'|'security-group'|'security-group-rule'|'snapshot'|'spot-fleet-request'|'spot-instances-request'|'subnet'|'subnet-cidr-reservation'|'traffic-mirror-filter'|'traffic-mirror-session'|'traffic-mirror-target'|'transit-gateway'|'transit-gateway-attachment'|'transit-gateway-connect-peer'|'transit-gateway-multicast-domain'|'transit-gateway-policy-table'|'transit-gateway-route-table'|'transit-gateway-route-table-announcement'|'volume'|'vpc'|'vpc-endpoint'|'vpc-endpoint-connection'|'vpc-endpoint-service'|'vpc-endpoint-service-permission'|'vpc-peering-connection'|'vpn-connection'|'vpn-gateway'|'vpc-flow-log'|'capacity-reservation-fleet'|'traffic-mirror-filter-rule'|'vpc-endpoint-connection-device-type'|'verified-access-instance'|'verified-access-group'|'verified-access-endpoint'|'verified-access-policy'|'verified-access-trust-provider'|'vpn-connection-device-type'|'vpc-block-public-access-exclusion'|'route-server'|'route-server-endpoint'|'route-server-peer'|'ipam-resource-discovery'|'ipam-resource-discovery-association'|'instance-connect-endpoint'|'verified-access-endpoint-target'|'ipam-external-resource-verification-token',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ]
        },
    ]
)

Parameters:

RouteServerId (string) –
[REQUIRED]

The ID of the route server for which to create an endpoint.
SubnetId (string) –
[REQUIRED]

The ID of the subnet in which to create the route server endpoint.
ClientToken (string) –
Unique, case-sensitive identifier to ensure idempotency of the request.

This field is autopopulated if not provided.
DryRun (boolean) – A check for whether you have the required permissions for the action without actually making the request and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
TagSpecifications (list) –
The tags to apply to the route server endpoint during creation.
- (dict) –
  
  The tags to apply to a resource when the resource is being created. When you specify a tag, you must specify the resource type to tag, otherwise the request will fail.
  
  Note
  The Valid Values lists all the resource types that can be tagged. However, the action you’re using might not support tagging all of these resource types. If you try to tag a resource type that is unsupported for the action you’re using, you’ll get an error.
  - ResourceType (string) –
    
    The type of resource to tag on creation.
  - Tags (list) –
    
    The tags to apply to the resource.
    - (dict) –
      
      Describes a tag.
      - Key (string) –
        
        The key of the tag.
        
        Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws:.
      - Value (string) –
        
        The value of the tag.
        
        Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.

Return type:

dict

Returns:

Response Syntax

{
    'RouteServerEndpoint': {
        'RouteServerId': 'string',
        'RouteServerEndpointId': 'string',
        'VpcId': 'string',
        'SubnetId': 'string',
        'EniId': 'string',
        'EniAddress': 'string',
        'State': 'pending'|'available'|'deleting'|'deleted'|'failing'|'failed'|'delete-failed',
        'FailureReason': 'string',
        'Tags': [
            {
                'Key': 'string',
                'Value': 'string'
            },
        ]
    }
}

Response Structure

(dict) –
- RouteServerEndpoint (dict) –
  
  Information about the created route server endpoint.
  - RouteServerId (string) –
    
    The ID of the route server associated with this endpoint.
  - RouteServerEndpointId (string) –
    
    The unique identifier of the route server endpoint.
  - VpcId (string) –
    
    The ID of the VPC containing the endpoint.
  - SubnetId (string) –
    
    The ID of the subnet to place the route server endpoint into.
  - EniId (string) –
    
    The ID of the Elastic network interface for the endpoint.
  - EniAddress (string) –
    
    The IP address of the Elastic network interface for the endpoint.
  - State (string) –
    
    The current state of the route server endpoint.
  - FailureReason (string) –
    
    The reason for any failure in endpoint creation or operation.
  - Tags (list) –
    
    Any tags assigned to the route server endpoint.
    - (dict) –
      
      Describes a tag.
      - Key (string) –
        
        The key of the tag.
        
        Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws:.
      - Value (string) –
        
        The value of the tag.
        
        Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.