GroundStation / Client / create_config

create_config¶

GroundStation.Client.create_config(**kwargs)¶

Creates a Config with the specified configData parameters.

Only one type of configData can be specified.

Request Syntax

response = client.create_config(
    name='string',
    configData={
        'antennaDownlinkConfig': {
            'spectrumConfig': {
                'centerFrequency': {
                    'value': 123.0,
                    'units': 'GHz'|'MHz'|'kHz'
                },
                'bandwidth': {
                    'value': 123.0,
                    'units': 'GHz'|'MHz'|'kHz'
                },
                'polarization': 'RIGHT_HAND'|'LEFT_HAND'|'NONE'
            }
        },
        'trackingConfig': {
            'autotrack': 'REQUIRED'|'PREFERRED'|'REMOVED'
        },
        'dataflowEndpointConfig': {
            'dataflowEndpointName': 'string',
            'dataflowEndpointRegion': 'string'
        },
        'antennaDownlinkDemodDecodeConfig': {
            'spectrumConfig': {
                'centerFrequency': {
                    'value': 123.0,
                    'units': 'GHz'|'MHz'|'kHz'
                },
                'bandwidth': {
                    'value': 123.0,
                    'units': 'GHz'|'MHz'|'kHz'
                },
                'polarization': 'RIGHT_HAND'|'LEFT_HAND'|'NONE'
            },
            'demodulationConfig': {
                'unvalidatedJSON': 'string'
            },
            'decodeConfig': {
                'unvalidatedJSON': 'string'
            }
        },
        'antennaUplinkConfig': {
            'transmitDisabled': True|False,
            'spectrumConfig': {
                'centerFrequency': {
                    'value': 123.0,
                    'units': 'GHz'|'MHz'|'kHz'
                },
                'polarization': 'RIGHT_HAND'|'LEFT_HAND'|'NONE'
            },
            'targetEirp': {
                'value': 123.0,
                'units': 'dBW'
            }
        },
        'uplinkEchoConfig': {
            'enabled': True|False,
            'antennaUplinkConfigArn': 'string'
        },
        's3RecordingConfig': {
            'bucketArn': 'string',
            'roleArn': 'string',
            'prefix': 'string'
        }
    },
    tags={
        'string': 'string'
    }
)

Parameters:

name (string) –
[REQUIRED]

Name of a Config.
configData (dict) –
[REQUIRED]

Parameters of a Config.

Note
This is a Tagged Union structure. Only one of the following top level keys can be set: antennaDownlinkConfig, trackingConfig, dataflowEndpointConfig, antennaDownlinkDemodDecodeConfig, antennaUplinkConfig, uplinkEchoConfig, s3RecordingConfig.
- antennaDownlinkConfig (dict) –
  
  Information about how AWS Ground Station should configure an antenna for downlink during a contact.
  - spectrumConfig (dict) – [REQUIRED]
    
    Object that describes a spectral Config.
    - centerFrequency (dict) – [REQUIRED]
      
      Center frequency of a spectral Config. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.
      - value (float) – [REQUIRED]
        
        Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.
      - units (string) – [REQUIRED]
        
        Frequency units.
    - bandwidth (dict) – [REQUIRED]
      
      Bandwidth of a spectral Config. AWS Ground Station currently has the following bandwidth limitations:
      - For AntennaDownlinkDemodDecodeconfig, valid values are between 125 kHz to 650 MHz.
      - For AntennaDownlinkconfig valid values are between 10 kHz to 54 MHz.
      - For AntennaUplinkConfig, valid values are between 10 kHz to 54 MHz.
      - value (float) – [REQUIRED]
        
        Frequency bandwidth value. AWS Ground Station currently has the following bandwidth limitations:
        
        For AntennaDownlinkDemodDecodeconfig, valid values are between 125 kHz to 650 MHz.
        
        For AntennaDownlinkconfig, valid values are between 10 kHz to 54 MHz.
        
        For AntennaUplinkConfig, valid values are between 10 kHz to 54 MHz.
      - units (string) – [REQUIRED]
        
        Frequency bandwidth units.
    - polarization (string) –
      
      Polarization of a spectral Config. Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.
- trackingConfig (dict) –
  
  Object that determines whether tracking should be used during a contact executed with this Config in the mission profile.
  - autotrack (string) – [REQUIRED]
    
    Current setting for autotrack.
- dataflowEndpointConfig (dict) –
  
  Information about the dataflow endpoint Config.
  - dataflowEndpointName (string) – [REQUIRED]
    
    Name of a dataflow endpoint.
  - dataflowEndpointRegion (string) –
    
    Region of a dataflow endpoint.
- antennaDownlinkDemodDecodeConfig (dict) –
  
  Information about how AWS Ground Station should conﬁgure an antenna for downlink demod decode during a contact.
  - spectrumConfig (dict) – [REQUIRED]
    
    Information about the spectral Config.
    - centerFrequency (dict) – [REQUIRED]
      
      Center frequency of a spectral Config. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.
      - value (float) – [REQUIRED]
        
        Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.
      - units (string) – [REQUIRED]
        
        Frequency units.
    - bandwidth (dict) – [REQUIRED]
      
      Bandwidth of a spectral Config. AWS Ground Station currently has the following bandwidth limitations:
      - For AntennaDownlinkDemodDecodeconfig, valid values are between 125 kHz to 650 MHz.
      - For AntennaDownlinkconfig valid values are between 10 kHz to 54 MHz.
      - For AntennaUplinkConfig, valid values are between 10 kHz to 54 MHz.
      - value (float) – [REQUIRED]
        
        Frequency bandwidth value. AWS Ground Station currently has the following bandwidth limitations:
        
        For AntennaDownlinkDemodDecodeconfig, valid values are between 125 kHz to 650 MHz.
        
        For AntennaDownlinkconfig, valid values are between 10 kHz to 54 MHz.
        
        For AntennaUplinkConfig, valid values are between 10 kHz to 54 MHz.
      - units (string) – [REQUIRED]
        
        Frequency bandwidth units.
    - polarization (string) –
      
      Polarization of a spectral Config. Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.
  - demodulationConfig (dict) – [REQUIRED]
    
    Information about the demodulation Config.
    - unvalidatedJSON (string) – [REQUIRED]
      
      Unvalidated JSON of a demodulation Config.
  - decodeConfig (dict) – [REQUIRED]
    
    Information about the decode Config.
    - unvalidatedJSON (string) – [REQUIRED]
      
      Unvalidated JSON of a decode Config.
- antennaUplinkConfig (dict) –
  
  Information about how AWS Ground Station should conﬁgure an antenna for uplink during a contact.
  - transmitDisabled (boolean) –
    
    Whether or not uplink transmit is disabled.
  - spectrumConfig (dict) – [REQUIRED]
    
    Information about the uplink spectral Config.
    - centerFrequency (dict) – [REQUIRED]
      
      Center frequency of an uplink spectral Config. Valid values are between 2025 to 2120 MHz.
      - value (float) – [REQUIRED]
        
        Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.
      - units (string) – [REQUIRED]
        
        Frequency units.
    - polarization (string) –
      
      Polarization of an uplink spectral Config. Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.
  - targetEirp (dict) – [REQUIRED]
    
    EIRP of the target.
    - value (float) – [REQUIRED]
      
      Value of an EIRP. Valid values are between 20.0 to 50.0 dBW.
    - units (string) – [REQUIRED]
      
      Units of an EIRP.
- uplinkEchoConfig (dict) –
  
  Information about an uplink echo Config.
  
  Parameters from the AntennaUplinkConfig, corresponding to the specified AntennaUplinkConfigArn, are used when this UplinkEchoConfig is used in a contact.
  - enabled (boolean) – [REQUIRED]
    
    Whether or not an uplink Config is enabled.
  - antennaUplinkConfigArn (string) – [REQUIRED]
    
    ARN of an uplink Config.
- s3RecordingConfig (dict) –
  
  Information about an S3 recording Config.
  - bucketArn (string) – [REQUIRED]
    
    ARN of the bucket to record to.
  - roleArn (string) – [REQUIRED]
    
    ARN of the role Ground Station assumes to write data to the bucket.
  - prefix (string) –
    
    S3 Key prefix to prefice data files.
tags (dict) –
Tags assigned to a Config.
- (string) –
  - (string) –

Return type:

dict

Returns:

Response Syntax

{
    'configId': 'string',
    'configType': 'antenna-downlink'|'antenna-downlink-demod-decode'|'tracking'|'dataflow-endpoint'|'antenna-uplink'|'uplink-echo'|'s3-recording',
    'configArn': 'string'
}

Response Structure

(dict) –
- configId (string) –
  
  UUID of a Config.
- configType (string) –
  
  Type of a Config.
- configArn (string) –
  
  ARN of a Config.

create_config¶

Request Syntax

Note

Response Syntax

Response Structure

Exceptions